Connecting
Adequate grounding must be provided to the FortiAP unit in
compliance with the local electrical code.
Caution: Do not use any PoE injectors that are not IEEE 802.3at
compliant, as they may damage your device.
1. Connect one end of the Ethernet cable into the LAN1 port of the
FortiAP unit.
2. Connect the other end of the Ethernet cable into your switch.
3. Connect one end of the console cable to the RJ-45 console port on
the FortiAP. Connect the other end to a management computer for
CLI access.
4. If you are not using PoE, connect the DC plug of the optional power
adapter into the DC power jack on the FortiAP unit, and then insert
the other end into an appropriate power outlet.
The power LED will light up.
8