Page 8
Page 9
Technical Specifications
LED Specifications
1
2
3
4
6
5
7
#
Interface
Type
Description
1
USB
USB-A USB port for connection to your modem.
2
Console
RJ-45
Not in use.
3
Ethernet Port RJ-45
Gigabit Ethernet port with PoE support up to 7.3W.
Default IP address: 192.168.1.2
4
AP/Bridge
RJ-45
PoE output. Provides 48V DC and network
connectivity.
5
Ground
Copper Electrical ground connection for the the PoE Injector.
6
Network
RJ-45
Connection to the network.
7
DC In
Provides 48V DC to the PoE injector.
100-240V AC, 50-60Hz, 1.5A max adapter
1 2 3 4 5
# LED
State
Description
1 Power
Green
The unit is on.
Flashing Green The unit is booting up.
Off
The unit is off.
2 Status
Green
The unit has successfully connected to the
controller and ISP.
Flashing Green The unit is connecting to the ISP.
Amber
The unit has successfully connected to the
controller but not the ISP.
Flashing Amber The unit is connecting to the controller.
Off
The unit is not connected.
3 LAN
Green
Port is connected at 1Gbps.
Amber
Port is connected at 10/100Mbps.
Flashing Green Port is transmitting and receiving data at 1Gbps.
Flashing Amber Port is transmitting and receiving data at
10/100Mbps.
Off
Port is not in use.
4 USB
Green
USB device recognized.
Amber
USB device not active or disabled.
Flashing Amber USB device not recognized or has an error.
Off
No device connected or port disabled.
5
Signal
Strength
Off
No signal, or signal indicator not supported for this
USB device.
1 Bar
Weak signal.
2 Bar
Okay signal.
3 Bar
Good signal.
4 Bar
Strong signal.
Summary of Contents for FortiExtender 100B
Page 1: ...FortiExtender 100B QuickStart Guide ...
Page 17: ......
