Fortinet FortiGate 100 Administration Manual Download

Page: 353 / 388

Log & Report

Log Setting options

FortiGate-100 Administration Guide

01-28006-0003-20041105

353

To configure log file uploading

Select the blue arrow to expand Log file upload settings.

Select Upload When Rolling.

Enter the IP address of the logging server.

Enter the port number on the logging server. The default is 21 (FTP).

Enter the Username and Password required on the logging server.

Enter the remote directory in which to save the log files.

Select the types of log files to upload.

Select Apply.

Memory settings

Syslog settings

WebTrends settings

Level

The FortiGate unit logs all messages at and above the logging severity

level you select. For example, if you select Error, the unit logs Error,

Critical, Alert and Emergency level messages. See

Table 36, “Logging

severity levels,” on page 352

Name/IP

The domain name or IP address of the syslog server that stores the logs.

Port

The port number for communication with the syslog server.

Level

The FortiGate unit logs all messages at and above the logging severity

level you select. For example, if you select Error, the unit logs Error,

Critical, Alert and Emergency level messages. See

Table 36, “Logging

severity levels,” on page 352

Facility

Facility indicates the source of a log message. By default, FortiGate

reports Facility as local7. You might want to change Facility to distinguish

log messages from different FortiGate units.

Enable CSV Format If you enable CSV format, the FortiGate unit produces the log in Comma

Separated Value (CSV) format. If you do not enable CSV format the

FortiGate unit produces plain text files.

Name/IP

The domain name or IP address of the WebTrends server that stores the

logs.

Level

The FortiGate unit logs all messages at and above the logging severity

level you select. For example, if you select Error, the unit logs Error,

Critical, Alert and Emergency level messages. See

Table 36, “Logging

severity levels,” on page 352

Note:

To record traffic log messages, you must set the logging severity level to Notification

when configuring the logging location. Traffic log messages do not generally have a severity
level higher than Notification.
Also,

you must enable traffic logging for specific interfaces or firewall policies.

Summary of Contents for FortiGate 100





































































































































































































































































































































































































Search results

Summary of Contents for FortiGate 100

Reviews:

Related manuals for FortiGate 100

Brands by name

Popular brands

Fortinet FortiGate 100, Administration Manual

Search results

Summary of Contents for FortiGate 100

Reviews:

Related manuals for FortiGate 100

Brands by name

Popular brands