364
01-28011-0254-20051115
Fortinet Inc.
Log config
Log & Report
Table 38
describes the FortiGate logging severity levels.
Disk settings
Local ID:
The identifier for the FortiGate unit. This must match the device name
assigned to this unit on the FortiLog unit.
Pre-shared key
The pre-shared key used for encryption.
Table 38: Logging severity levels
Level
Description
Emergency
The system has become unstable.
Alert
Immediate action is required.
Critical
Functionality is affected.
Error
An error condition exists and functionality could be affected.
Warning
Functionality could be affected.
Notification
Notification of normal events.
Information
General information about system operations.
Maximum size of log
file
The maximum size of the log file that is saved to the disk. When the log
file reaches the specified maximum size, the current log file is saved and
a new active log file is started. The default maximum log file size is
100 MB and the maximum log file size allowed is 1 GB.
Roll log time
The specified time of day, when the FortiGate unit saves the current log
file and starts a new active log file. The FortiGate unit uses the date
configured in the Roll log day setting.
Roll Log Frequency The number of times the current log should be saved and a new active
log started: each minute, hour, or day (as selected in the Unit drop down
list).
Unit
The unit of time that corresponds to the specified Roll Log Frequency:
minute, hour, or day.
Roll log day
The day of the week when the FortiGate unit saves the log file and starts
a new log file. The FortiGate unit uses the time of date configured in the
Roll log time setting.
Roll log policy
The policy to follow for saving the current log and starting a new active
log. Overwritten deletes the oldest log entry when the disk is full. Block
traffic stops all network traffic when the disk is full. Do not log stops
logging messages when the disk is full.
Level
The FortiGate unit logs all messages at and above the logging severity
level you select. For example, if you select Error, the unit logs Error,
Critical, Alert and Emergency level messages. See
Table 38, “Logging
severity levels,” on page 364
.
Log file upload settings
Upload When Rolling Select to upload log files to an FTP server whenever a log file rolls.
Configure settings for the FTP server and select the type of log files to
upload.
Upload Server IP
Enter the IP address of the FTP server to which to upload the log files.
Port
Enter the port number used by the FTP server. The default port is 21,
which is the standard FTP port.
Username
Enter the user name required to connect to the FTP server.
Password
Enter the password required to connect to the FTP server.
Summary of Contents for FortiGate 1000A
