Fortinet FortiGate 3000 Administration Manual Download | Manualshive

Page: 21 / 398

background image

Introduction

About FortiGate Antivirus Firewalls

FortiGate-3000 Administration Guide

01-28006-0010-20041105

21

Web content filtering

FortiGate web content filtering can scan all HTTP content protocol streams for URLs,
URL patterns, and web page content. If there is a match between a URL on the URL
block list, or a web page contains a word or phrase that is in the content block list, the
FortiGate unit blocks the web page. The blocked web page is replaced with a
message that you can edit using the FortiGate web-based manager.

FortiGate web content filtering also supports FortiGuard web category blocking. Using
web category blocking you can restrict or allow access to web pages based on
content ratings of web pages.

You can configure URL blocking to block all or some of the pages on a web site. Using
this feature, you can deny access to parts of a web site without denying access to it
completely.

To prevent unintentionally blocking legitimate web pages, you can add URLs to an
exempt list that overrides the URL blocking and content blocking lists. The exempt list
also exempts web traffic this address from virus scanning.

Web content filtering also includes a script filter feature that can block unsecure web
content such as Java applets, cookies, and ActiveX.

Spam filtering

FortiGate spam filtering can scan all POP3, SMTP, and IMAP email content for spam.
You can configure spam filtering to filter mail according to IP address, email address,
mime headers, and content. Mail messages can be identified as spam or clear.

You can also add the names of known Real-time Blackhole List (RBL) and Open
Relay Database List (ORDBL) servers. These services contain lists of known spam
sources.

If an email message is found to be spam, the FortiGate adds an email tag to the
subject line of the email. The recipient can use the mail client software to filter
messages based on the email tag. Spam filtering can also be configured to delete
SMTP email messages identified as spam.

Firewall

The FortiGate ICSA-certified firewall protects your computer networks from Internet
threats. ICSA has granted FortiGate firewalls version 4.0 firewall certification,
providing assurance that FortiGate firewalls successfully screen and secure corporate
networks against a range of threats from public or other untrusted networks.

After basic installation of the FortiGate unit, the firewall allows users on the protected
network to access the Internet while blocking Internet access to internal networks. You
can configure the firewall to put controls on access to the Internet from the protected
networks and to allow controlled access to internal networks.

«
...
19
20
21
22
23
...
»

Summary of Contents for FortiGate 3000















































































































































































































































































































































































































Reviews:

No comments

Related manuals for FortiGate 3000

Brand: Watchguard Pages: 12

ZyWALL SEM-DUAL

Brand: ZyXEL Communications Pages: 2

ZYWALL 35 - V4.03

Brand: ZyXEL Communications Pages: 142

Brand: Fortinet Pages: 12

Brand: H3C Pages: 59

Brand: Barracuda Pages: 2

Brand: PaloAlto Networks Pages: 2

Brand: Watchguard Pages: 2

Brand: Hillstone Pages: 50

NetDefend DFL-CP310

Brand: D-Link Pages: 455

NetDefend SOHO DFL-160

Brand: D-Link Pages: 356

DFL-1600 - Security Appliance

Brand: D-Link Pages: 552

Brand: Netgate Pages: 56

Brand: Netgate Pages: 65

MAESTRO R80.20SP

Brand: Check Point Pages: 228

Brand: Blue Coat Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands