Fortinet FortiGate 3000 Administration Manual Download

Page: 379 / 398

FortiGuard categories

FortiGate-3000 Administration Guide

01-28006-0010-20041105

379

16. Weapons

Sites that provide information about, promote, or

support the sale of weapons and related items.Sport

Hunting and Gun Clubs -- Sites that provide

information about or directories of gun clubs and

similar groups, including war-game and paintball

facilities.

Potentially Non-productive

17. Advertisement

Sites that provide advertising graphics or other ad

content files.

18. Brokerage and Trading

Sites that support active trading of securities and

management of investments.

19. Freeware and Software Download

Sites whose primary function is to provide freeware

and software downloads.

20. Games

Sites that provide information about or promote

electronic games, video games, computer games,

role-playing games, or online games. Includes

sweepstakes and giveaways.

21. Internet Communication

Web Chat -- Sites that host Web chat services or

that support or provide information about chat via

HTTP or IRC.Instant Messaging -- Sites that enable

instant messaging. Message Boards and Clubs --

Sites for online personal and business clubs,

discussion groups, message boards, and list

servers; includes 'blogs' and 'mail magazines.'

Digital post cards - Sites for sending/viewing digital

post cards.

22. Pay to Surf

Sites that pay users to view Web sites,

advertisements, or email

23. Web-based Email

Sites that host Web-based email.

Potentially Bandwidth Consuming

24. File Sharing and Storage

Peer-to-Peer File Sharing -- Sites that provide client

software to enable peer-to-peer file sharing and

transfer. Personal Network Storage and Backup --

Sites that store personal files on Internet servers for

backup or exchange.

25. Streaming Media

MP3 -- Sites that support downloading of MP3 or

other sound files or that serve as directories of such

sites.
Internet Radio and TV -- Sites whose primary

purpose is to provide radio or TV programming on

the Internet.
Internet Telephony -- Sites that enable users to

make telephone calls via the Internet or to obtain

information or software for that purpose.

Potentially Security Violating

26. Malicious Web Sites

Sites that contain code that may intentionally modify

end-user systems without their consent and cause

harm.

27. Spyware

Sites or pages that download software that, without

the user's knowledge, generates http traffic (other

than simple user identification and validation).

Table 38: FortiGuard categories

Category name

Description

Summary of Contents for FortiGate 3000















































































































































































































































































































































































































Search results

Summary of Contents for FortiGate 3000

Reviews:

Related manuals for FortiGate 3000

Brands by name

Popular brands

Fortinet FortiGate 3000, Administration Manual

Search results

Summary of Contents for FortiGate 3000

Reviews:

Related manuals for FortiGate 3000

Brands by name

Popular brands