Shelf Manager CLI
Fortinet Technologies Inc.
If no FRUs have a problem, the command displays
There are no unhealthy components in the shelf.
The following information is shown for each FRU considered to have a problem:
l
IPMB address and FRU device ID
l
Current Hot Swap state
l
Previous hot swap state
l
Cause of the last state change.
switchover
clia switchover [-force]
If a chassis has two shelf managers, you can enter this command to switch the active shelf manager to running as the
backup shelf manager and the backup shelf manager to switch to running as the active shelf manager. You can enter
this command from the active or backup shelf manger. When you enter the command the shelf managers negotiate a
smooth switchover.
If you enter this command from the backup shelf manager you can include -force to force the switchover without any
negotiation. The backup shelf manager immediately becomes the active shelf manager and the active shelf manager
reboots and starts up as the backup shelf manager.
terminate
clia terminate [-reboot]
This command terminates the Shelf Manager and reboots the ShMM. Including -reboot does not change the command.
clia terminate [-reboot]
This command terminates the Shelf Manager. If you include -reboot the ShMM unconditionally reboots. If you do not
include -reboot, the command terminates the Shelf Manager without rebooting the ShMM.
user
clia user [add | delete | enable | name | passwd | channel]
clia user [-v] [<user_id>]
Use this command to add, delete, modify and display RMCP user accounts for a shelf manager.
Display all user accounts
Enter the following command to display user account information:
clia user -v
Pigeon Point Shelf Manager Command Line Interpreter
1: ""
Channels 0-15 Privilege level: "Administrator"
Flags: "IPMI Messaging"
FortiGate-5144C 6.2.3 Chassis Guide
61
