Shelf Manager CLI
Fortinet Technologies Inc.
7: "TEST1" Disabled
Channels 0-15 Privilege level: "NO ACCESS"
Include
-v
to display disabled user accounts. For each user account the command displays:
l
User ID
l
User name
l
Channel access information for each IPMI channel: the maximum privilege level of that user account on that
channel, and channel access flags. If the channel access information is the same for several channels, the output
displays the information for the channel number range.
Adding a user account
Use the following command syntax to add a user account:
user add <user_id> <user_name> <channel_access_flags> <privilege_level> <password>
This command adds a new RMCP user account to the shelf manager. The command also sets the same maximum
privilege level and channel access flags for all channels. Where:
l
<user_id>
is a valid user ID
l
<user_name>
is a user name (truncated to the 16 characters without notice)
l
<channel_access_flags>
is the first byte of the
SetUserInfo
commands (only bits 4,5,6 are meaningful)
l
bit 6 enables IPMI messaging
l
bit 5 enables link authentication
l
bit 4 restricts the user to callback
l
<privilege_level>
is the user account privilege level
l
<password>
is the user account password (truncated to the 16 characters without notice).
For example, add a user account with user ID 9, user name
user_1
, administrator privilege level, and password
my-
password
.
clia user
Pigeon Point Shelf Manager Command Line Interpreter
1: ""
Channels 0-15 Privilege level: "Administrator"
Flags: "IPMI Messaging"
clia user add 9 "user_1" 0x40 4 "my-password"
Pigeon Point Shelf Manager Command Line Interpreter
User 9 added successfuly
clia user
Pigeon Point Shelf Manager Command Line Interpreter
1: ""
Channels 0-15 Privilege level: "Administrator"
Flags: "IPMI Messaging"
9: "user_1"
Channels 0-15 Privilege level: "Administrator"
Flags: "IPMI Messaging"
FortiGate-5144C 6.2.3 Chassis Guide
62
