background image

Factory default settings

Quick Configuration Guide

FortiGate-5001D Security System Guide

28

01-500-0242101-20151109

http://docs.fortinet.com/

 

Factory default settings

The FortiGate-5001D unit ships with a factory default configuration. The default 
configuration allows you to connect to and use the FortiGate-5001D web-based manager 
to configure the FortiGate-5001D board onto the network. To configure the 
FortiGate-5001D board onto the network you add an administrator password, change the 
network interface IP addresses, add DNS server IP addresses, and, if required, configure 
basic routing.

Configuring NAT/Route mode

Use 

Table 8

 to gather the information you need to customize NAT/Route mode settings 

for the FortiGate-5001D security system. You can use one table for each board to 
configure.

Table 7:   FortiGate-5001D factory default settings

Operation Mode

NAT/Route

Administrator Account

User Name: admin

Password: (none)

mgmt1 IP/Netmask

192.168.1.99/24

mgmt2 IP/Netmask

192.168.100.99/24

Default route

Gateway: 192.168.100.1

Device: mgmt2

Primary DNS Server: 

208.91.112.53

Secondary DNS Server: 

208.91.112.52

At any time during the configuration process, if you run into problems, you can reset the 
FortiGate-5001D board to the factory defaults and start over. From the CLI enter 

execute factory reset

.

Table 8:   FortiGate-5001D board NAT/Route mode settings

Admin Administrator Password:

mgmt1 

IP:

_____._____._____._____

Netmask:

_____._____._____._____

port1 

IP:

_____._____._____._____

Netmask:

_____._____._____._____

port2 

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Default Route 

Device (Name of the Interface 
connected to the external 
network):

Default Gateway IP address:

_____._____._____._____

The default route consists of the name of the interface connected 
to an external network (usually the Internet) and the default gateway 
IP address. The default route directs all non-local traffic to this 
interface and to the external network.

DNS Servers

Primary DNS Server:

_____._____._____._____

Secondary DNS Server:

_____._____._____._____

Summary of Contents for FortiGate-5001D







































Reviews: