help
Using the shelf manager CLI
FortiGate-5060 Chassis Guide
46
01-400-129494-20110912
busres force <res>
busres info [<res>]
busres lock <res>
busres query [-v] <res> [<target> [noupdate]]
busres release <res>
busres sendbusfree <res> <target>
busres setowner <res> <target>
busres unlock <res>
deactivate <addr> <fru_id>
debuglevel [<mask> [<console mask>] ]
dhcp <restart> | <status>
exit
fans <addr> <fru id>
firewall [<info [[[[<channel>]:<LUN>]:<NetFn>]:<command>] |
<[all]>> | <stop> | <start>]
fru [<addr> [id=<fru_id> | type=<site_type>]] |
[type=<site_type> [/<site_number>]]
frucontrol <addr> <fru_id> <command>
frudata [<addr>] [<fru id>] [<block number>]
frudata shm <N> [<block number>]
frudata <addr> <fru id> <byte offset> <byte_1> [byte2 ..
[byte_16]]
frudatar <addr> <fru id> <file name>
frudataw [-s|-d|-p|-l] <addr> <fru id> <file name>
frudataw <-s|-d|-p|-l> -c <addr> <fru id>
fruinfo <addr> <fru_id>
getbootdev <addr> [<fru-id> | <amc-addr>]
getconfigparam [<parameter name>]
getfanlevel <addr> <fru_id>
getfanpolicy [<addr> [<fru_id>]] [-s <addr>|site_type
[<fru_id>|site_number]]
getfruledstate [-v] [<addr> [<fru_id> [<LedId>|ALL]]]
gethysteresis [ <addr> [ [ lun: ]<sensor id> | <sensor name> ]
]
gethysteresis [ <addr> -f <fru id> ]
gethysteresis [ <addr> -f amc <amc number> ]
getipmbstate <addr> [<link>]
getlanconfig <channel number> <parameter number> | <parameter
name>
getpefconfig <parameter name> | <parameter number> [<set
selector>]
getsensoreventenable [ <addr> [ [ lun: ]<sensor_id> | <sensor
name> ] ]
getsensoreventenable [ <addr> -f <fru id> ]
getsensoreventenable [ <addr> -f amc <amc number> ]
getthreshold [ <addr> [ [ lun: ]<sensor id> | <sensor name> ]
]
getthreshold [ <addr> -f <fru id> ]
getthreshold [ <addr> -f amc <amc number> ]
help [<command>]
ipmc [-v] [-x] [<addr>]
localaddress
minfanlevel <addr> <fru_id> <min fan level>
minfanlevel [<min fan level>]
