Using the shelf manager CLI
help
FortiGate-5060 Chassis Guide
01-400-129494-20110912
47
•
poll
quit
sel [clear] [ <addr> [ <number of items> [<number of first
item>] ] ]
sel info [<addr>]
sendamc <addr> <amc> <netfn> <command> [<parameters ...>]
sendcmd <addr> <netfn> <command> [<parameters ...>]
sensor [ <addr> [ [ lun: ]<sensor id> | <sensor name> ] ]
sensor [ <addr> -f <fru id> ]
sensor [ <addr> -f amc <amc number> ]
sensordata [-t] [-d <state>] [ <addr> [ [ lun: ]<sensor id> |
<sensor name> ] ]
sensordata [-t] [-d <state>] [ <addr> -f <fru id> ]
sensordata [-t] [-d <state>] [ <addr> -f amc <amc number> ]
sensorread <addr> [ lun: ]<sensor id>
session
setbootdev <addr> <fru-id | amc-addr> <boot-device>
setcommandpolicy <Enable|Disable> <NetFn> <CMD> [<channel>]
[<LUN>]
setextracted <addr> <fru_id>
setfanlevel <addr> <fru_id> <state>
setfanpolicy <addr> <fru_id> <ENABLE | DISABLE [timeout]> [-s
<addr> | site_type <fru_id> | site_n
umber]
setfruledstate <addr> <fru_id> <LedId> | ALL <LedOp | tail>
[LedColor]
setfunctionpolicy <EnableDisableMask> <NetFn> <CMD>
[<channel>] [<LUN>]
sethysteresis <addr> [ lun: ]<sensor_id> | <sensor name> pos |
neg <value>
setipmbstate <addr> A | B [<link>] 0|1
setlanconfig <channel number> <parameter number> | parameter
name <parameters ...>
setlocked <addr> <fru_id> <value>
setpefconfig <parameter name> | <parameter number> [<set
selector>] <parameters ...>
setpowerlevel <addr> <fru_id> [<pwr_lvl> | OFF] [Copy]
setsensordata <addr> [ lun: ]<sensor_id> | <sensor name> [
reading [-r] <value> ]
[ assertion <mask> ] [ deassertion <mask> ]
[ event_data <b1> <b2> <b3> | event_data_no_offset <b1> <b2>
<b3>]
setsensoreventenable <addr> [ lun: ]<sensor_id> | <sensor
name> global [assertion_events [deassert
ion_events]]
setthreshold <addr> [ lun: ]<sensor_id> | <sensor name> unc |
uc | unr | lnc | lc | lnr [-r] value
shelf <parameters>
shelf address_table
shelf at
shelf board_lan_cfg_params
shelf cooling_state
shelf cs
shelf fans_state
