FortiGate-5140B shelf managers
FortiGate-5140B chassis
FortiGate-5140B Chassis Guide
14
01-500-156415-20151104
If DC power is not available you can use one or more FortiGate-5053B power converter
shelves equipped with PSU-5000B power supplies to convert AC to DC to supply DC
power to the FortiGate-5140B chassis from an AC source.
Physical description of the FortiGate-5140B chassis
The FortiGate-5140B chassis is a 13U chassis that can be installed in a standard 19-inch
rack.
describes the physical characteristics of the FortiGate-5140B chassis.
FortiGate-5140B shelf managers
The FortiGate-5140B chassis includes one or two redundant hot-swappable shelf
managers, located in the dedicated shelf manager slots at the bottom right side of the
back panel. The primary shelf manager is installed on the left the secondary shelf
manager (if present) is installed on the right. The secondary shelf manager is optional.
Table 1: FortiGate-5140B chassis
physical description
Dimensions
22.63 x 19 x 22.6 in. (57.5 x 48.3 x 57.4 cm) (H x W x D)
Shipping weight completely
assembled with packaging
110 lbs (50 kg)
Chassis weight completely
assembled with shelf
manager and air baffles (13
front and 14 RTM)
84 lbs (38 kg)
PEM DC terminal torque
No more than 3.8 Nm (33.62 lbf.in)
Operating environment
Temperature (long term): 41 to 104°F (+5 to 40°C)
Temperature (short term): 23 to 131°F (-5 to 45°C)
Relative humidity: 5 to 85% (Non-condensing)
Power consumption
Maximum: 530 W (Power consumed by an empty
chassis with four fans, one shelf manager, two shelf
alarm modules and two PEMs installed and operating
with the fans running at full speed.)
Power input
2x redundant -48 Vdc/-60Vdc, 100A-84A per PEM
Overcurrent Protection
Each PEM includes 5 power channels. Each channel
includes its own 100 A fuse.
Cooling Capacity
Front Boards: 300 W per board
RTM: 35 W per module
Protected Earth Test
EN60950-1, test current 25 A, resistance <100 mOhm
Hipot Test
EN60950-1, 1000 V
