background image

FortiGate-620B FortiOS 3.0 MR6 Install Guide

40

01-30006-83054-20081015

Removing modules

AMC modules

To insert a module into a FortiGate chassis

1

Ensure the FortiGate unit is powered off before proceeding.

2

Remove the panel block on the FortiGate unit using the hot swap latch.

3

Pull the latch on the module to the extended position.

4

Insert the FortiGate module into the empty slot in the chassis. Ensure the Fortinet 
logo is right-side up. It should be on the upper-right corner of the module.

5

Carefully guide the module into the chassis.

6

Insert the module by applying moderate force to the front faceplate near the upper 
edge to slide the module into the slot.

The module should glide smoothly into the chassis. If you encounter any 
resistance while sliding the module in, the module could be aligned incorrectly. 
Pull the module back out and try inserting it again.

7

Press the hot swap latch to lock in the module.

8

Power on the FortiGate unit.

Removing modules

Should you need to remove a module, shut down the FortiGate unit using proper 
shut down procedures.

To remove a module

1

Ensure the FortiGate unit is powered off before proceeding.

2

To avoid any electrostatic discharge (ESD) when handling FortiGate modules, 
install in a static free area.

3

Pull the hot swap latch on the right-hand side of the module to the extended 
position to unlock the module from the FortiGate unit.

4

Gently pull the hot swap latch to remove the module.

Using the AMC modules

Hard disk module

The FortiGate ASM-S08 is a single-width 80 gigabyte hard disk that enables you 
to store log files, content archives locally on your FortiGate unit.

Using the hard disk, you can enable the FortiGate unit to log to the disk, and 
periodically upload rolled logs to a FortiAnalyzer unit for storage.

Note: 

The FortiGate-3810A supports only one FortiGate-ASM-S08 hard disk module.

Note: 

AMC modules are not hot swappable. Always ensure you properly shut down the 

FortiGate unit before installing or removing a module.

Summary of Contents for FortiGate-620B































































Reviews: