background image

System maintenance 

Registering a FortiGate unit

FortiGate-100A Administration Guide

01-28006-0068-20041105

 129

FortiCare Support Contract numbers, if you purchased FortiCare Support Contracts 
for the FortiGate units that you want to register.

1

Go to 

System > Maintenance > Support

.

2

Select FDS Registration.

3

Enter your contact information on the product registration form.

4

Provide a security question and an answer to the security question.

5

Select the model number of the Product Model to register.

6

Enter the Serial Number of the FortiGate unit.

7

If you have purchased a FortiCare Support Contract for this FortiGate unit, enter the 
support contract number.

8

Select Finish.
If you have not entered a FortiCare Support Contract number (SCN) you can return to 
the previous page to enter the number. If you do not have a FortiCare Support 
Contract, you can select Continue to complete the registration.
If you have entered a support contract number, a real-time validation is performed to 
verify that the SCN information matches the FortiGate unit. If the information does not 
match you can try entering it again.
A web page is displayed that contains detailed information about the Fortinet technical 
support services available to you for the registered FortiGate unit.

9

Your Fortinet support user name and password is sent to the email address provided 
with your contact information.

Shutdown

You can use the Maintenance page to log out, restart and shut down the FortiGate 
unit.

Figure 48: System shut down

To log out of the system

1

Go to 

System > Maintenance > Shutdown

.

2

Select Logout.

3

Select Apply.
The FortiGate unit logs out.

To restart the system

1

Go to 

System > Maintenance > Shutdown

.

Summary of Contents for FortiGate FortiGate-100A





































































































































































































































































































































































































Reviews: