manualshive.com logo in svg

Fortinet FortiGate FortiGate-60M, Administration Manual

The Fortinet FortiGate-60M is a powerful network security appliance that ensures optimal protection for small to mid-sized businesses. To effectively manage and configure this device, users can easily access the comprehensive Administration Manual. Download this manual for free from our website, 88.208.23.73:8080, and unleash the full potential of your FortiGate-60M.

Share
Download
background image

96

01-28007-0144-20041217

Fortinet Inc.

HA

System config

To configure weighted-round-robin weights

By default, in active-active HA mode the weighted round-robin schedule assigns the 
same weight to each FortiGate unit in the cluster. If you configure a cluster to use the 
weighted round-robin schedule, from the CLI you can use 

config system ha 

weight

 to configure a weight value for each cluster unit. The weight value sets the 

maximum number of connections that are sent to a cluster unit before a connection 
can be sent to the next cluster unit. You can set weight values to control the number of 
connections processed by each cluster unit. For example, you might want to reduce 
the number of connections processed by the primary cluster unit by increasing the 
weight assigned to the subordinate cluster units.

Weight values are entered as two values; the priority order of the unit in the cluster (in 
the range 0 to 31) followed by its weight (also in the range 0 to 31). For example, if you 
have a cluster of three FortiGate units, you can enter the following command to 
configure the weight values for each unit:

config system ha

set ha weight 0 1 1 3 2 3
end

This command has the following results:

• The first connection is processed by the primary unit (priority 0, weight 1)
• The next three connections are processed by the first subordinate unit (priority 1, 

weight 3)

• The next three connections are processed by the second subordinate unit (priority 

2, weight 3)

The subordinate units process more connections than the primary unit, and both 
subordinate units, on average, process the same number of connections.

Managing an HA cluster

The configurations of all of the FortiGate units in the cluster are synchronized so that 
the FortiGate units can function as a cluster. Because of this synchronization, you 
manage the HA cluster instead of managing the individual FortiGate units in the 
cluster. You manage the cluster by connecting to the web-based manager using any 
cluster interface configured for HTTPS administrative access. You can also manage 
the cluster by connecting to the CLI using any cluster interface configured for SSH 
administrative access.

You can also use SNMP to manage the cluster by configuring a cluster interface for 
SNMP administrative access. Using an SNMP manager you can get cluster 
configuration information and receive traps. For a list of HA MIB fields, see 

“HA MIB 

fields” on page 106

 and 

“FortiGate HA traps” on page 105

.

You can change the cluster configuration by connecting to the cluster and changing 
the configuration of the primary FortiGate unit. The cluster automatically synchronizes 
all configuration changes to the subordinate units in the cluster as the changes are 
made.

The only configuration change that is not synchronized is the FortiGate host name. 
You can give each cluster unit a unique host name to help to identify cluster members.

Summary of Contents for FortiGate FortiGate-60M

























































































































































































































































































































































































Reviews:

No comments

Related manuals for FortiGate FortiGate-60M

Global Technology Associates GB-1200 Product Manual preview
GB-1200
Brand: Global Technology Associates Pages: 28
Genua genucard Quick Start Manual preview
genucard
Brand: Genua Pages: 51
NETGEAR ProSafe FWAG114 Reference Manual preview
ProSafe FWAG114
Brand: NETGEAR Pages: 192
Fortinet FortiGate 500D Information Supplement preview
FortiGate 500D
Brand: Fortinet Pages: 12
Fortinet FortiGate 1000D Quick Start Manual preview
FortiGate 1000D
Brand: Fortinet Pages: 14
Fortinet FortiGate 300C Quick Start Manual preview
FortiGate 300C
Brand: Fortinet Pages: 20
Fortinet FortiGate 100 Installation Manual preview
FortiGate 100
Brand: Fortinet Pages: 54
Fortinet FortiGate 3000 Installation Manual preview
FortiGate 3000
Brand: Fortinet Pages: 56
NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Installation Manual preview
STM150 - ProSecure Web And Email Threat Management Appliance
Brand: NETGEAR Pages: 2
NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Appliance Reference Manual preview
STM150 - ProSecure Web And Email Threat Management Appliance
Brand: NETGEAR Pages: 248
PaloAlto Networks PA-5400 Series Hardware Reference Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 92
NETGEAR ProSafe FR114W Specifications preview
ProSafe FR114W
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands