Factory defaults
FortiGate-800 and FortiGate-800F FortiOS 3.0MR4 Install Guide
01-30004-0269-20070215
23
Factory default Transparent mode network configuration
In Transparent mode, the FortiGate unit has the default network configuration
listed in
Table 6 on page 23
.
Table 6: Factory default Transparent mode network configuration
Factory default firewall configuration
FortiGate firewall policies control how all traffic is processed by the FortiGate unit.
Until firewall policies are added, no traffic can be accepted by or pass through the
FortiGate unit. To allow traffic through the FortiGate unit, you can add firewall
policies. See the
FortiGate Administration Guide
for information about adding
firewall policies.
The following firewall configuration settings are included in the default firewall
configuration to make it easier to add firewall policies.
Table 7: Factory default firewall configuration
Administrator
account
User name:
admin
Password: (none)
Management IP
IP: 0.0.0.0
Netmask: 0.0.0.0
DNS
Primary DNS Server:
65.39.139.53
Secondary DNS Server:
65.39.139.63
Internal HTTPS,
Ping
External
Ping
DMZ
HTTPS, Ping
Administrative access
Port 1
Ping
Port 2
Ping
Port 3
Ping
Port 4
Ping
Configuration setting Name
Description
Firewall address
All
Firewall address matches the source or
destination address of any packet.
Pre-defined service
More than 50
predefined services
Select from any of the 50 pre-defined
services to control traffic through the
FortiGate unit that uses that service.
Recurring schedule
Always
The recurring schedule is valid at any
time.
Protection Profiles
Strict, Scan, Web,
Unfiltered
Control how the FortiGate unit applies
virus scanning, web content filtering, spam
filtering, and IPS.
