18
help
Show a list of valid CLI commands.
show
Show the bootstrap configuration including
the port IP address (IPv4), network
mask, and default gateway.
set port1-ip <ip>/<netmask>
Set the port 1 IP address and netmask.
set portX-ip <ip>/<netmask>
Set the port
X
IP address and netmask.
set default-gw <ip>
Set the default gateway.
reboot
Reboot the FortiSandbox. All sessions will
be terminated.
shutdown
Shut down the FortiSandbox.
status
Show various system information.
For example, to configure the
IP address
and
gateway
of the FortiSandbox device, use
the following commands:
set port1-ip 192.168.0.10/24
set default-gw 192.168.0.1
Useful CLI Commands
A limited CLI is available for basic device configuration and
debugging
purposes.
The FortiSandbox device is primarily configured using the
GUI
.
Summary of Contents for FortiSandbox 1000F
Page 1: ...FortiSandbox 1000F FSA 1000F FSA 1000F DC QuickStart Guide ...
Page 12: ......
