10
To remove the transceivers
1. Ensure that you are properly grounded.
2. If applicable, disconnect the fiber-optic cable from the
transceiver connector and install a clean dust plug in
the transceiver’s optical bores.
3. Pull the latch out and down into the horizontal
position. If you are unable to use your finger to open
the latch, use a small flat-head screwdriver or other
similar tool to open the latch.
4. Install a clean dust plug into the transceiver’s optical
bores.
5. Hold the sides of the transceiver and carefully pull it
away from the cage socket.
6. Replace the cap on the cage socket and place the
removed transceiver into an antistatic bag.
