Appliance Setup
15.
The final configuration confirmation is displayed. Verify that the parameters are correct. If they are not, then press
Back
to return to previous dialog boxes to correct any errors. If everything is OK, then press
Run
.
The options are described in the following table.
Option
Description
-r
The FortiSIEM component being configured
-z
The time zone being configured
-i
IPv4-formatted address
-m
Address of the subnet mask
-g
Address of the gateway server used
--host
Host name
-f
FQDN address: fully-qualified domain name
-t
The IP type. The values can be either
4
(for
ipv4
)
or
6
(for
v6
) or
64
(for both ipv4 and ipv6).
--dns1, --dns2
Addresses of the DNS servers
FortiSIEM 6.3.1 500F Collector Configuration Guide
10
Fortinet Technologies Inc.
