13
Step 6: Rear Light
•
The rear seat light comes pre-assembled on the electric bike. Before using the bike,
remove the “PULL” sticker.
•
To turn the light on, press the button under the light. (
Figure 11
)
Figure 11
Battery Installation
Install:
Press the release button under the saddle to fold it forward. Then align the slot on
the bottom of the battery with the track on the frame. The battery should slide smoothly
into place. Insert the key and turn it clockwise twice to the ON position, fold back the saddle
and the bike is ready for use.
Lock:
After the battery is installed in place, turn the key clockwise by one gear to OFF, at
which time the key can be removed to lock the battery.
WARNING:
While folding the saddle, ensure hands are clear of the
front folding parts.
(Figure 12)
Figure 12
