Step 3
1. Use one washer (5) and the nylon bolt (6) to secure the pedal tube (23)
and the left and right swing frames (14R) (14L). Then, use one hexagon
screw (19), one washer (17) and one nut (16) to connect the connector (48),
and then cover with the a screw cap (7).
2. Use two hexagon bolts (20), two washers (17) and two nuts (16) to connect
the pedals (21) with the pedal tubes (23).
Step 4
1. Use two hexagon screws (36), 4 arc
washers (30) and two nuts (25) to
connect the middle handlebar (37)
with the front stabilizer (41), then lock
the screw and put on the screw cap
(26).
6
Summary of Contents for FSTNRELTPLA
Page 1: ......
