7
First Time Use
1.
Remove any protective films or stickers from the soleplate and the appliance body.
2.
Unwind and straighten the power cord.
3.
Fill the Water Tank (See How to Fill Water).
4.
Connect the appliance to a suitable mains supply outlet.
5.
Turn the Temperature Dial to “
” (3-dot) setting.
6.
Pilot Light will go off when the desired temperature is reached.
7.
It is suggested to begin first time ironing with an old towel as testing.
8.
Press the Burst of Steam button until the water tank is empty and there is no more steam can
be produced, it means the preparation work is completed and the appliance is ready for
proper use.
Important
– When using the appliance or while it is heating up, do not put it down on its
soleplate. Lay it down on its side on a solid and flat surface.
Dry Ironing
1.
Connect the appliance to a suitable mains supply outlet.
2.
Turn the Temperature Dial in clockwise direction; select “ ” (1-dot), “
” (2-dot) or
“
” (3-dot) according to the recommendation of the garment label.
3.
Pilot Light will go off when the desired temperature is reached.
4.
The appliance is ready for use.
5.
After used, turn the Temperature Dial in anti-clockwise direction to the ‘MIN’ position to turn
off the appliance.
6.
Disconnect the appliance from the mains supply outlet and lay it down on its side on a solid
and flat surface.
7.
When the appliance gets cool completely, empty the water tank and store it in a safe place.
Burst of Steam Ironing / Vertical Steam
Note: Please unplug the appliance from the mains supply and allow it to cool down completely.
1.
Fill the Water Tank (See How to Fill Water).
2.
Connect the appliance to a suitable mains supply.
3.
Turn the Temperature Dial to “
” (3-dot) setting.
4.
The Pilot Light will go off when the desired temperature is reached.
5.
The iron is ready for use.
6.
While ironing / vertical steam, press the Burst of Steam Button to release steam. It helps to
remove creases on the garment.
7.
Do not press the Burst of Steam Button more than three times successively. Allow few
seconds intervals between operating the burst of steam, otherwise water leakage may occur.
8.
After used, turn the Temperature Dial in anti-clockwise direction to the ‘MIN’ position to turn
off the appliance.
9.
Disconnect the appliance from the mains supply outlet and lay it down on its side on a flat
and stable surface.
10.
When the appliance gets cool completely, empty the water tank and store it in a safe place.
Warning-
Do not apply steam on any clothes or fabrics that are being worn by human or pets.
Temperature of the steam is high.
