Operation Maintenance Manual
2018-05
PN 9GV73109 - Revision: 02
Safety Spinning Wrench
31
SA
FE
TY
2.5.4
Human Error
Ignorance of hazards, inattentiveness and limited reactions
can lead to hazard situations while working with the
Safety Spinning Wrench.
Safe Work
1. All personnel working on the SSW-40 are responsible for
paying attention to their colleagues.
2. Consumption of alcohol and drugs is prohibited.
3. Work on and with the SSW-40 is not permissible after
taking medication which reduces reactions.
4. AT LEAST visual contact must exist between the operator
in the doghouse and the personnel at the SSW-40, to
allow communication by hand signals.
5. Always keep the personal protective equipment in perfect
condition.
6. All personnel working on and with the SSW-40 must be
familiar with and observe the safety precautions in this
OMM and on the SSW-40.
7. Observe instructions for handling and maintenance
intervals specified in this OMM.
8. Keep a copy of this OMM in the near of the SSW-40,
where it is accessible at all times.
9. All personnel working on and with the SSW-40 have to
know the SSW-40 limitations.
10. Do not permit people near the unit controls during
inspections or repair, unless they are supervising or part
of the inspection/repair team.
11. Recognize all pinch points on moving components and
maintain a safe distance from them.
12. Ample loose clothing, watches or bracelets, which can be
dangerous in some circumstances. FORUM Handling Tools
strongly recommends to not wear those clothing on the
job.
13. Do not store materials, tools or other equipment on or
next to the SSW-40.
14. Always listen for abnormal noises during operation.
» In the event of an abnormal occurrence (noise, irregular
motion, etc.), immediately stop operation and secure the
area for inspection.
» Notify the site supervisor immediately.
2.5.3
Organizational Measures
The operating company is responsible for ensuring that all
legally and officially prescribed approvals for operation of
the SSW-40 are present and in compliance with national
laws and regulations. The required personal protective
equipment („IX-02 Personal Protective Equipment (PPE)“,
on page 9) must be provided by the company
operating the SSW-40. Check all safety features in
compliance with national and local requirements for
presence regularly. Warning signs and safety notices on the
SSW-40 and its components must be legible at all times
and replaced as required. Keep operating instructions so
that they are available to those operating the SSW-40 at all
times.
Personal Protective Equipment
Always use the required Personal Protective Equipment
(PPE) when operating the Safety Spinning Wrench. This has
to be provided by the operating company.
The following PPE is recommended:
- Oil resistant protective clothing,
- Protective gloves,
- Eye protection,
- Safety shoes,
- Protective helmet.
Check all parts of the protective equipment regularly for
damages and replace them if necessary.
