6
Latch Bar
Latch Bar Stud
1/2"
Exposed
Latch Bar Nut
Adjust Latch Bar Jam Nut To
Allow Latch Bar Stud To Be
Adjusted 1/2” Out Of the Top
Of The Latch Bar Nut
Fig. 6
Fig. 7
Step 4: Reinstalling Column Top Plates:
A.) Install (1) column top plate in each column, Fig. 6. Make sure
latch bar jam nut is located far enough down the latch bar stud
to allow you to fully insert the column top plate in the top of the
column.
B.) After column top plates have been installed adjust latch bar
nut and latch bar jam nut as shown, Fig. 7.
Column Top Plate
Top Of Column
Latch Bar Stud
Ø20 Flat
Washer
M20 Latch Bar
Jam Nut
Ø12 Washer On Each
Side Of Column
M12 X 35 Hex Head Bolt
(4 On Each Column)
Ø12 Lockwasher
and M12 Nut
M20 Latch
Bar Nut
