3. Charge the UPS
This unit is shipped from the factory with its internal battery fully charged; however, some
charge may be lost during shipping. Therefore, it is recommended to charge the battery prior
to initial use. Simply plug the unit into an appropriate AC outlet, and allow it to recharge to full
capacity for at least 8 hours.
4. Connect to home theater or server PC
Connect your TV/receiver or computer-related device into each power receptacle supplied on
the back of the UPS, as shown below.
Home theater
Server/PC
ANTENNA
IN
ANTENNA
OUT
TV
SATELLITE / CATV / CABLE MODEM
COMPUTER
