1
2
Important safety instructions (Save this sheet)
This unit is intended for installation in a controlled environment (temperature-controlled indoor area location, free of conductive
contaminants). Avoid installing the UPS where there is standing or running water, or excessive humidity.
To reduce the risk of overheating, do not cover the cooling vents. Avoid exposing the UPS to direct sunlight or installing the unit
near heat-emitting appliances, such as electric heaters or furnaces.
Do not connect non-computer related peripheral devices, such as medical devices, life-support equipment, microwave ovens, or
vacuum cleaners to the UPS.
Do not connect any power strip or surge suppressor to the UPS.
Do not plug the UPS AC input power cord into its own output.
Do not allow any kind of liquid or foreign object to enter this UPS unit. Do not place beverages or any other containers with liquid
on or nearby the unit.
During the installation of this equipment, make sure that the sum of the leakage currents of the UPS and the connected loads shall
not exceed 3.5mA. In case of emergency, turn the power switch “off” and disconnect the power cord from the AC mains outlet.
Unplug the UPS before cleaning, and do not use liquid or spray detergents.
Never try to open or mutilate a battery. Released electrolyte is harmful to the skin and eyes, and also can be toxic.
Servicing of batteries should be performed or supervised by experts who possess the knowledge to closely follow all required
precautions.
When replacing the battery, make sure to use the same type and number of sealed lead-acid batteries specified.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
CAUTION!
Upon opening the box, make sure the following items are included:
Remove the UPS from its package and look for damages that may have occurred during shipping. If any damage is discovered, repack
the unit and return it to the place of purchase.
1. UPS unit
2. User manual
3. CD with software
4. USB cable
5. Warranty certificate
Thank you for purchasing the
SL-1501UL / SL-2001UL Line Interactive Smart UPS
from Forza. To enjoy all the features and benefits
of this unit, we encourage you to read this manual and follow the installation and operation instructions thoroughly.
This unit features a state of the art LCD display and powerful features designed to protect your equipment and sensitive electronics
from voltage fluctuations and power failures. Reliable and interrupted performance is possible through the integration of voltage
regulation, surge suppression and backup capabilities –all in a single unit. The new SL includes a power management software, with
the latest in system monitoring technology. The SL UPS system comes in 1500VA and 2000VA configurations.
1. Introduction
2. Package content
2.1 Inspection
• A battery can present the risk of short-circuit current and electrical shock. The following precautions should be taken:
1) Remove watches, rings, or other metal objects from your hand.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not place tools or metal parts on the top of batteries.
5) Disconnect charging source prior to connecting or disconnecting battery terminals.
•
Attention:
potentially hazardous voltages from the battery can still be present even after disconnecting the UPS from the AC mains.
Therefore, the positive and negative terminals of the battery shall be disconnected prior to performing any maintenance or repair
inside the unit.
• The UPS contains internal 12VDC, sealed, lead-acid batteries.
• Do not dispose of batteries in a fire. Batteries may explode if exposed to high temperatures.
Safe handling of batteries
Attention: Risk of electric shock
3. Product overview
SL-1501UL / SL-2001UL
4
9
5
7
6
3
8
