Foshan Chilies Z 06160 Instruction Manual Download

Page: 28 / 63

• If you have set a preparation time, cooking temperature and motor speed be-

fore starting, these values can be changed at any time during preparation. Please
note that the motor speed cannot be set to 0!

• If a motor speed was set before starting, the motor speed and preparation time

can be changed during preparation.

6. After expiry of the preparation time the appliance beeps ten times. If a cooking tempera-

ture was set before starting, the appliance stops heating. The orange indicator lamp (

HEI-

ZEN

= Heating) extinguishes. However, the motor continues to operate at the set speed

for 10 minutes without interruption. In this case the appliance can be stopped at any time
with the

Start/Stop

button. If you do not stop the appliance prematurely, it will beep again

after 5 minutes. If a cooking temperature was set before starting, the appliance automatically
stops after expiration of the preparation time. If no cooking temperature was set before
starting, the appliance automatically stops after 20 minutes and beeps ten times.

7. To switch off the appliance, place the ON/OFF switch to

and pull the plug out of the plug

socket.

Using the "Knead" programme

1. Connect the appliance to a properly installed, well accessible plug socket and place the ON/

OFF switch in position

. The top line of the display shows

00 : 00

(display of the prepara-

tion time) and in the bottom line

0 0

(display of cooking temperature

display of motor

speed).

2. Press the

Kneten

button (knead). The cooking temperature is automatically set to 0 °C and

the motor speed to 3. The displays shows the symbol

• Motor speed and cooking temperature cannot be changed in the "Knead" pro-

gramme. Only the preparation time can be set.

3. Preparation time: Press the

Zeit

button (time) once. The minutes display

ashes. You can

now set the minutes with the

and

buttons. By pressing the button once, the minute dis-

play is increased or decreased by 1 minute. Press the

Zeit

button (time) a second time. The

seconds display

ashes. You can now set the seconds with the

and

buttons. By pressing

the button once, the second display is increased or decreased by 1 second. The maximum
preparation time that can be set is 90 minutes.

• You can start the "Knead" programme without setting the preparation time. In

this case the appliance operates for 20 minutes and then stops automatically.

4. Start the appliance with the

START/STOP

button. The appliance starts working for 3 sec-

onds and stopping for 4 seconds. The preparation time that was set, starts counting down. If
no preparation time was set, the preparation time counts up.

• When the appliance operates in the "Knead" programme, you can change the

preparation time at any time. By pressing the

Kneten

button (knead) again, the

"Knead" programme is aborted and the symbol

disappears.

• If the appliance was started with manually set values for preparation time, cook-

ing temperature and motor speed, then the "Knead" programme can no longer
be activated. The

Kneten

button (knead) is then deactivated.

06160_DE-GB-FR-NL_A5_V3.indb 28

24.09.2013 10:40:11