Model OMC-W36-2:
•
Power supply voltage .................. single phase
AC 230V ± 10%
•
Power supply frequency .............. 50 Hz ± 10%
•
Power consumption rating ........... 250W
2.3 Specifications
-
Operating temperature range: 40 °C –
140 °C
1
-
Temperature sta/- 2
°C
•
ALWAYS
use the unit at the rated voltage, as indicated on rear panel, beside
the inlet plug. As the unit requires proper grounding use a 3-wire plug cord
with a Type 3 or better grounding. Ignoring or failing to follow the above
instructions can lead to permanent damage to the device and severe
personnel injury or death.
2.4 Installation
Please follow these steps during installation of the unit:
i.
Put the unit on a flat desk in place that conforms to the environmental
conditions as listed in paragraph 2.1
ii.
Assemble the cord holder. Insert the cord holder into mounting hole on
the top unit. Fix the cord holder by fixing the screw at the back panel
of the unit by the screwdriver provided.
iii.
Connect the power cable to the AC inlet in the back panel of the unit
and plug it to a wall outlet.
1
Cure temperature can be set above 140 °C, but it is not recommended as the automated protection switch will
be activated when cure temperature exceeds 140
–
150 °C
WARNING
!
Summary of Contents for OMC-W36
Page 2: ...Blank page ...
Page 6: ...Blank page ...