Foster EPREM 1/2H, Service Manual

Cabinet Description 

EPrem cabinets. 

The Pro range consists of a choice of capacities and temperature ranges in the full gastronorm format (650 x 530 
shelf) and the non gastronorm (530x 550 shelf) formats. 
The cabinets are manufactured as a one piece foam shell with easy clean stainless steel exterior 
The cabinets conform to current legislation and exceed the Montreal protocol using zero ODP refrigerants and 
insulation with Hydrocarbon refrigerant as an option. 
There are 3 temperature options exceeding Climate Class 5 operation up to 43°c ambient. 
Temperature is controlled by a LAE microprocessor control with digital temperature display.  
The standard refrigeration system is integral with an air-cooled condensing unit with the refrigerant distribution into 
the evaporator controlled by capillary. 
Remote systems are available as an option with the refrigerant distribution into the evaporator controlled by 
expansion valve. 
The cooled air is circulated through the evaporator, via the fan into the storage area. 
Easy removable plug box and lid. 
Coated coils prevent corrosion and prolong refrigeration life.

Removable thermal break giving easy access to the door frame heater. 
Easy to read temperature display with wipe clean finish. 
Wide magnetic gasket giving a positive door seal

. 

EPrem counters. 

The Pro range consists of a choice of capacities and temperature ranges in the full gastronorm format (650 x 530 
shelf) and the non gastronorm (530x 550 shelf) formats. 
The cabinets are manufactured as a one piece foam shell with easy clean stainless steel exterior 
The cabinets conform to current legislation and exceed the Montreal protocol using zero ODP refrigerants and 
insulation with Hydrocarbon refrigerant as an option. 
There are 3 temperature options exceeding Climate Class 5 operation up to 43°c ambient. 
Temperature is controlled by a LAE microprocessor control with digital temperature display.  
The standard refrigeration system is integral with an air-cooled condensing unit with the refrigerant distribution into 
the evaporator controlled by capillary. 
Remote systems are available as an option with the refrigerant distribution into the evaporator controlled by 
expansion valve. 
The cooled air is circulated through the evaporator, via the fan into the storage area. 
Easy accessible condensing unit fitted on slides for ease of servicing. 
Coated coils prevent corrosion and prolong refrigeration life.

Removable thermal break giving easy access to the door frame heater. 
Easy to read temperature display with wipe clean finish. 
Wide magnetic gasket giving a positive door seal. 

Controller Operation 

FEPC controller (00-556122) 
 
 
 
 
 
 

The controller has two displays, the right hand display gives temperature readout and the left hand will display fault 
codes, error codes and other information. 
The controller connects to the power switching unit using a ten way and sixteen way ribbon cable. 
 

Temperature Display symbols 

Compressor: LED illuminated beneath the symbol indicates the compressor in operation. 

Fan/s: LED illuminated beneath the symbol indicates the fan/s in operation. 

Defrost: LED illuminated beneath the symbol indicates defrost in operation. 

 
There is a circular reed switch fitted at the bottom of the facia panel that corresponds with a magnet at the top of 
the door to stop the evaporator fan when the door is opened (not fitted on heated or fish cabinets). 
Door switch kit part number is 16240122. 
 

2