122
Model D2424LV Reference Manual (Changing the Initial Setting <SETUP mode>)
Flashing
Setting the Operating Clock (“Clock Sel ?” menu)
The “
Setting the Operating Clock
” menu is used to setup the operating clock of the recorder.
If digital input is set to asynchronous mode of “
adat: Async
” or “
SPDIF: Async
” in the previous “
D. in?
” (Digital
input setting), whether this recorder is to operated by its internal clock or synchronized to the word clock
signal from the external digital equipment should be selected when recording in digital from external digital
equipment (DAT, adat, CD, MD, etc.). The initial setting is set to synchronize to the internal clock.
The setup item “Video” is effective if an optional Model 8346 TC/SYNC card is installed.
For details, refer to the “
APPENDIX
.”
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the Jog dial to select “Clock Sel ?” (“?”
flashes), then press the [EXECUTE/YES] key.
A flashing “
?
” will extinguish by pressing the [
EXECUTE/
YES
] key and the operating clock information that was
lit will being flashing. Initial setting, it will show “
Int.
”
• Initial setting:
[Int.]
• Option:
[Int.]
(Internal clock)
[Auto]
[Word]
[Video]
(Tis item will be
effective if the optional Model
8346 TC/SYNC card is
installed in this recorder.)
* This setting is shared by all Programs in the same
disk.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the recorder.
3.With the Jog dial, select the operating clock.
If “
Int.
” (initial setting) is selected, the recorder will
operate using the internal clock.
If “
Auto
” is selected, the recorder will sync to an external
digital signal.
If “
Word
” is selected, the recorder will sync to an external
word clock signal.
4.Press the [EXECUTE/YES] key.
The selected operating clock will register and “?” in step-
2 above, will flashes.
Refer to the chart of next page in regards to “Digital
input setting” and “Operating clock setting.”
Setting the operating clock
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
To cancel the operation, or to restore the setting
obtained prior to the
[EXECUTE/YES]
key press, press
the
[STOP]
button or the
[EXIT/NO]
key. Each time you
press one of these keys, the recorder returns to the
previous hierarchy level of the menu, and finally exits
SETUP mode and displays the previous Time Base.
To cancel the operation, or to restore the setting
obtained prior to the
[EXECUTE/YES]
key press, press
the
[STOP]
button or the
[EXIT/NO]
key. Each time you
press one of these keys, the recorder returns to the
previous hierarchy level of the menu, and finally exits
SETUP mode and displays the previous Time Base.
