125
Model D2424LV Reference Manual (Changing the Initial Settings <SETUP mode>)
3. Select the desired function by rotating the Jog
dial.
4. After selecting the function, press the [EXECUTE/
YES] key again.
The selected foot switch function will be registered and
the Step-2 "
?
" will return to flashing.
Setup of the stop function at the mark point (“Mark Stop MD?” menu)
At the “
Setup of the stop function at the mark point
” menu, this sets whether or not D2424LV should automatically
stop at the preset mark point (=locate point) during playback.
• Initial setting:
[Off]
• Options:
[OFF]
or
[On]
* This setting is shared by all Programs in the same disk.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the recorder.
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the Jog dial to select “Mark Stop MD?” (“?”
flashes), then press the [EXECUTE/YES] key.
A flashing “
?
” will extinguish by pressing the [
EXECUTE/
YES
] key and the stop function at the mark point
information that was lit will being flashing. Initial setting,
it will show “
Off
”.
3. Select "On" or "Off" with the Jog dial and press
the [EXECUTE/YES] key again.
The selected stop function will be registered and the
Step-2 "?" will return to flashing.
4. Exit from the SETUP mode by pressing the [EXIT/
NO] key (or the [STOP] button).
Setting the stop function at the mark point
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
Flashing
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
5. Exit from the SETUP mode by pressing the [EXIT/
NO] key (or [STOP] button).
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
Flashing
To cancel the operation, or to restore the setting
obtained prior to the
[EXECUTE/YES]
key press, press
the
[STOP]
button or the
[EXIT/NO]
key. Each time you
press one of these keys, the recorder returns to the
previous hierarchy level of the menu, and finally exits
SETUP mode and displays the previous Time Base.
To cancel the operation, or to restore the setting
obtained prior to the
[EXECUTE/YES]
key press, press
the
[STOP]
button or the
[EXIT/NO]
key. Each time you
press one of these keys, the recorder returns to the
previous hierarchy level of the menu, and finally exits
SETUP mode and displays the previous Time Base.
