34
Model VM88 Owner’s Manual
Details of the setup menu. The (*) symbol in the chart indicates initial setup.
* System clock setup menu
During input of a digital signal from external digital equipment, either operate the VM88 with its internal
clock (44.1kHz) or operate it in sync with the digital signal from the external digital equipment. The setup
content will be held even if the main power is switched off.
< Please remember! >
* If the DIGI IN format is set to S/P DIF, of the input channels to which it is set, S/P DIF L signal is input
to the odd number channel and the R signal to the even number channel. In other words, in the initial
setup of ch7/ch8, the L signal is routed to channel 7, and the R signal to channel 8. Also, if the input
channels are setup to 4 channels, ch1 ~ ch4, then the L signal will be routed to channels 1 and 3, and
the R signal to channels 2 and 4.
* If set to ADAT 44.1 or 48.0, signal will be input to the channel number corresponding to the ADAT
signals, ch1 ~ ch8. In other words, at the initial setup of ALL Ch, the ADAT signal ch1 ~ ch8 will be
routed to their respective channels. Also, if the input channels are set to 2 channels ch1/ch2, then, the
ADAT signal ch1 and ch2 only will be active.
<Display>
<Select item>
-> INT
-> EXT (*)
The VM88 operates by its internal clock (FS: 44.1kHz).
The VM88 operates in sync with external digital signals.
<Function>
* DIGITAL IN setup menu
DIGITAL IN format and the DIGITAL IN initiating channel can be set via the DIGITAL IN setup menu.
Setup content will be held even if the main power is switched off.
<Display>
<Select item>
-> OFF (*)
-> ADAT 44.1
DIGI IN setup not functional.
Setup to FS: 44.1kHz ADAT digital signals.
<Function>
-> ADAT 48.0
-> S/P DIF
Setup to FS: 48kHz ADAT digital signals.
Setup to FS:44.1 or 48kHz S/P DIF digital signals.
<Select item>
->-> ALL Ch (*)
->-> ch1/ch2
Setup to input channels all 8 channels ch1 ~ ch8.
Setup 2 channels, ch1 and ch2 to input channels.
<Function>
->-> ch3/ch4
->-> ch5/ch6
Setup 2 channels, ch3 and ch4 to input channels.
Setup 2 channels, ch5 and ch6 to input channels.
->-> ch7/ch8 (*)
->-> ch1-ch4
->-> ch5-ch8
Setup 2 channels, ch7 and ch8 to input channels.
Setup 4 channels, ch1 ~ ch4 to input channels.
Setup 4 channels, ch5 ~ ch8 to input channels.
(*) The initial setup of the input channel is [ALLCh] when the DIGI IN format is set to ADAT 44.1 or ADAT
48.0, and [ch7/ch8] if setup to S/P DIF.
<DIGI IN format>
<Input channel for DIGI IN>
< NOTE >
If the system clock is set to [INT], noise will be generated unless the VM88 is used as the master machine.
< Please remember! >
If there is no external digital signal or DIGITAL IN lock is disengaged, the VM88 will operate by [INT]
(Internal clock).
