manualshive.com logo in svg

Fostex VM88, Owner'S Manual

The Fostex VM88 is a versatile audio mixer with advanced capabilities. If you need assistance operating this device, you can easily access the Service Manual on our website. Simply download it for free to unlock a wealth of information, helping you get the most out of your VM88 experience.

Share
Download
background image

40

Model VM88  Owner’s Manual

<AUSTRIA>

NAME: ATEC Audio-u. Videogeraete VertriebsgesmbH.
ADD: Im Winkel 5, A-2325 Velm, Austria
TEL: (+43) 2234-74004, FAX: (+43) 2234-74074

<BELGIUM>

NAME: EML Sound Industries NV
ADD: Bijvennestraat 1A, B3500 Hasselt, Belgium
TEL: (+32) 11-232355, FAX: (+32) 11-232172

<DENMARK>

NAME: SC Sound ApS
ADD: Malervej 2, DK-2630 Taastrup, Denmark
TEL: (+45) 4399-8877, FAX: (+45) 4399-8077

<FINLAND>

NAME: Noretron Oy Audio
ADD: P. O. Box 22, FIN-02631 Espoo, Finland
TEL: (+358) 9-5259330, FAX: (+358) 9-52593352

<FRANCE>

NAME: Musikengro
ADD: ZAC de Folliouses, B. P. 609, 01706 Les Echets, France
TEL: (+33) 472 26 27 00, FAX: (+33) 472 26 27 01

<GERMANY>

NAME: Studiosound & Music GmbH
ADD: Industriestrasse 20, D-35041 Marburg, F. R. Germany
TEL: (+49) 6421-92510, FAX: (+49) 6421-925119

<GREECE>

NAME: Bon Studio S. A.
ADD: 6 Zaimi Street, Exarchia, 106.83 Athens, Greece
TEL: (+30) 1-3809605-8, 3302059, FAX: (+30) 1-3845755

<ICELAND>

NAME: I. D. elrf. electronic Ltd.
ADD: Armula 38 108 Reykjavik, Iceland
TEL: (+354) 588 5010, FAX: (+354) 588 5011

Declaration of EC Directive

This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of
member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage
Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning elec-
tric equipment designed to be used within the specified voltage range.

The Affect of Immunity on This Equipment

The affect of the European specification EN50082-1 (coexistence of electromagnetic waves - common immunity specification) on
this equipment are as shown below.

In the electrical fast transient / burst requirements, radiated electromagnetic field requirements and static electricity discharging
environment, this could be affected by generation of noise in some cases.

Fostex Distributors List In Europe

 * Including non - EU countries. * underlined: contracted distributors (as of April, 1999)

<ITALY>

NAME: Recoton Italia Srl.
ADD:V. 1 Maggio, N  18, 40050 Quarto Inferiore, (BO) Italy
TEL: (+39) 051-768576, FAX: (+39) 051-768336

<THE NETHERLANDS>

NAME: IEMKE ROOS AUDIO B. V.
ADD: Kuiperbergweg 20, 1101 AG Amsterdam, The Nether-
lands
TEL: (+31) 20-697-2121, FAX: (+31) 20-697-4201

<NORWAY>

NAME: Siv. Ing. Benum A/S
ADD: P. O. Box 145 Vinderen, 0319 Oslo 3, Norway
TEL: (+47) 22-139900, FAX: (+47) 22-148259

<PORTUGAL>

NAME: Caius - Tecnologias Audio e Musica, Lda.
ADD: Rua de Santa Catarina, 131 4000 Porto, Portugal
TEL: (+351) 2-2086009/2001394, FAX: (+351) 2-2054760/
2087488

<SPAIN>

NAME: Multitracker. S. A.
ADD: C/Garcilaso No. 9, Madrid 28010, Spain
TEL: (+34) 91-4470700, 91-4470898, FAX: (+34) 91-5930716

<SWEDEN>

NAME: TTS Professional Television AB
ADD: Kavallerivagen 24, 172 48 Sundbyberg, Sweden
TEL: (+46) 8-59798000, FAX: (+46) 8-59798001

<SWITZERLAND>

NAME: Audio Bauer Pro AG
ADD: Bernerstrasse-Nord 182, CH-8064 Zurich, Switzerland
TEL: (+41) 1-4323230, FAX: (+41) 1-4326558

<UK>

NAME: SCV London
ADD: 3A 6-24 Southgate Road, London N1 3JJ, England, UK
TEL: (+44) 171-923-1892, FAX: (+44) 171-241-3644

Summary of Contents for VM88









































Reviews:

No comments

Related manuals for VM88

Varimixer W80 Spare Part And Operation Manual preview
W80
Brand: Varimixer Pages: 29
DigiTech PedalVerb PDS3000 Reference Manual preview
PedalVerb PDS3000
Brand: DigiTech Pages: 12
Midas VeniceF16 Quick Start Manual preview
VeniceF16
Brand: Midas Pages: 5
Bartscher MX 235 Plus Instruction Manual preview
MX 235 Plus
Brand: Bartscher Pages: 172
audiophony H11041 User Manual preview
H11041
Brand: audiophony Pages: 24
Valcom VE8091 Activation, Configuration, Testing preview
VE8091
Brand: Valcom Pages: 11
SoundCraft LX7-2 Technical Manual preview
LX7-2
Brand: SoundCraft Pages: 108
Fantini Rubinetti NOSTROMO E881 Manual preview
NOSTROMO E881
Brand: Fantini Rubinetti Pages: 16
Doyon AEF 015SP Owner'S Manual preview
AEF 015SP
Brand: Doyon Pages: 21
Adler Europe AD 4205 User Manual preview
AD 4205
Brand: Adler Europe Pages: 52
Racing RACBTE800-UK Instruction Manual preview
RACBTE800-UK
Brand: Racing Pages: 23
Beyerdynamic MA 206 Operating Instructions Manual preview
MA 206
Brand: Beyerdynamic Pages: 44
Studer OnAir 2000M2 Operating And Service Instructions preview
OnAir 2000M2
Brand: Studer Pages: 449
Hamilton Beach 63233 Manual preview
63233
Brand: Hamilton Beach Pages: 48
Singer SDM-1045BLIN Instruction Manual preview
SDM-1045BLIN
Brand: Singer Pages: 16
Philips HR1974/00 User Manual preview
HR1974/00
Brand: Philips Pages: 2
Philips HR3740 User Manual preview
HR3740
Brand: Philips Pages: 4
Philips RI7200/00 Service Manual preview
RI7200/00
Brand: Philips Pages: 5

Brands by name

Popular brands

Load more brands