background image

Supply Wire Size Recommendations

The table at the right is provided to assist the       

licensed electrician in sizing the electric supply 

wires required to deliver power to each individual 

heater.  All branch circuit supply wiring must be 

copper, rated 90o C minimum and comply with all 

local codes and the NEC.

All recommended wire sizes assume a 50ft. 

maximum wire length.  

                    

REQUIRED CLEARANCES

DO NOT install heaters closer than 36 inches to a 

vertical surface or 24 inches to a ceiling. Heaters 

MUST BE SEPARATED by more than 36 inches 

and 72 inches from any combustible surface in 

direct radiation path (87 inches for FSS-95 

Series).

HEATER HANGING ALTERNATIVES

One method of hanging the heaters (shown 

below) is with hardware chain and “S” hooks. The 

chain and “S” hooks must be either 14 or 16 gauge 

for all models. The heaters also can be mounted 

“fixed” with angle iron, metal rods or metal straps. 

Whatever means is used to mount the heaters, 

the terminal box must be EVEN WITH or LOWER 

THAN the horizontal plane of the heater housing. 

ISSUE DATE 07-2015     REV. DATE ------------     REV. LEVEL: -       ECO 1-7090        OIPM P/N 8419                      PG 8 OF12

FIRE HAZARD

BURN HAZARD

•  Install heaters to comply with 

REQUIRED CLEARANCES 

listed above at right.

•  Do not mount heaters 

vertically.

INSTALLATION - HANGING HEATERS

INSTALLATION PLANNING (CON’T.)

Heater Model

kW

Volts

Amps

Recommended

AWG Wire Size

   3ph    1ph

     3ph    1ph

FSS-1412-1

1.45

120

N/A

12.08

N/A

12

FSS-1420-1

1.45

208

N/A

6.97

N/A

12

FSS-1424-1

1.45

240

N/A

6.04

N/A

12

FSS-1427-1

1.45

277

N/A

5.23

N/A

12

FSS-1448-1

1.45

480

N/A

3.02

N/A

12

FSS-1457-1

1.45

600

N/A

2.52

N/A

12

FSS-3120-1

3.15

208

N/A

15.14

N/A

12

FSS-3124-1

3.15

240

N/A

13.13

N/A

12

FSS-3127-1

3.15

277

N/A

11.37

N/A

12

FSS-3148-1

3.15

480

N/A

6.56

N/A

12

FSS-3157-1

3.15

600

N/A

5.48

N/A

12

FSS-4320-3

4.3

208

11.9

20.67

12

10

FSS-4324-3

4.3

240

10.4

17.9

12

10

FSS-4327-1

4.3

277/480

5.2

15.5

12

12

FSS-4348-3

4.3

480

5.2

9.0

12

12

FSS-4357-3

4.3

600

4.3

7.5

12

12

FSS-9520-3

9.5

208

26.4

45.7

8

8

FSS-9524-3

9.5

240

22.9

39.6

10

8

FSS-9527-1

9.5

277/480

11.4

34.3

12

8

FSS-9548-3

9.5

480

11.4

19.8

12

10

FSS-9557-3

9.5

600

9.5

16.5

12

10

Summary of Contents for FSS Series













Reviews: