FOTILE EMS6008, Operation And Installation Manual

- 6 -

- 7 -

Product performance 

Operation instruction

Electrical parameters

Product model

：

EMS6008/EMS6008-C

Performance parameter 

Voltage/frequency

Motor power

LED lamp power Total input power

220-240V/50Hz

294W

3W×2

300W

Grease separation degree

96%

Odor reduction 

degree

99%

Shift

Turbo mode

High mode

Middle mode

Low mode

Air volume

（

m

3

/h

）

1090

1030

850

480

Noise

（

dB(A)

）

57

56

51

39

Maximum static pressure

（

Pa

）

900

880

860

310

Notes

：

a. Air volume is tested in accordance with IEC 61591 standard, and noise tested in 

accordance with IEC 60704-3 standard. 

b. The indicated noise value is A-weighted sound pressure level, and the sound 

power level are 69 dB(Turbo mode), 68 dB(High mode), 64 dB(Middle mode), 51 

dB(Low mode) ; 

c. Such parameters as air volume and noise may have a deviation of less than 5%. 

Method  of  Use     

■

Gesture Function

 I

n Off state, wave your hand and quickly pass by the induction windows on both ends of the operation 

panel. The range hood will start its high-speed operation and the LED lamp will be switched on. Wave 

your hand again and quickly pass by the induction windows on both ends of the operation panel, the 

power/delay   indicator will flash and the range hood will be in the shutdown delay status. The LED 

lamp remains in its original state, and the light can be turned off by gently touching the lamp button. 

After operating for 1 minute in its current state, the fan will switch to low-speed operation and operate 

for 4 minutes before shutting down.

      In Off state, press the lighting button   and low-speed/middle-speed button 

 simultaneously for 

5 seconds, all the buttons on the control panel will be lit for 1 second and then go out, the gesture 

induction function is enabled/disabled.                    

■

Power/Delay button 

 In Off state, gently touch the power/delay button once, the range hood will be in the standby state, the 

power/delay button indicator will be fully lit, and other button indicators will be slightly lit; in the 

operating state, gently touch the power/delay button, the power/delay button indicator will flash and the 

range hood will be in the shutdown delay state. The LED lamp remains in the original state, and the 

light can be turned off by gently touching the lamp button. After operating for 1 minute in the current 

state, the fan will switch to low-speed operation for 4 minutes before shutting down.

     In the standby state or delayed shutdown state, gently touch the power/delay button once. All the button  

indicators will go out and the range hood will then be powered off.

       All the following button commands will be carried out in standby mode:

■

High

mode/Turbo

mode 

Gently touch the high mode/turbo mode. The high mode/turbo mode indicator will be half lit, and range 

hood will operate in high mode; gently touch the high mode/turbo mode again, the high mode/turbo  

mode indicator will be fully lit and flash, and the range hood will operate in turbo mode state. After 100 

seconds, the range hood will return to high mode operation, and the high mode/turbo mode indicator 

will be half lit.

       When the range hood is operating in turbo mode state, gently touch the high mode/turbo mode again, the  

high mode/turbo mode indicator will be lit slightly, and the range hood will stop operating.

■

Low mode/Middle mode button 

      Gently touch the low mode/middle mode button, the low mode/middle mode indicator will be half lit, and 

the range hood will operate in low mode state; gently touch the low mode/middle mode button again, 

the low mode/middle mode indicator will be fully lit, and the range hood will operate in middle mode 

state; gently touch the low mode/middle mode button again, the low mode/middle mode indicator will 

be lit slightly, and the range hood will stop operating.

■

Lighting button 

      Gently touch the lighting button, the button will be fully lit and the LED lamp will be turned on. Gently 

touch the lighting button again, the button will be lit slightly and the LED lamp will be switched off.

■

Lock screen button

When the range hood is not in operation, press the lock screen button for 2 seconds. After the machine makes a 

clicking sound, the indicator of lock screen button will be fully lit and flash, all buttons will be locked. The screen 

locking function can be cancelled by long pressing the lock screen button again for 2 seconds.

 Sensor

 Sensor

Low/Middle

High/Turbo

Power supply/

Delay-off

Light

Lock screen

Carbon filter change reminder