background image

Model 100-EHBP

Horizontal Diaper Changing Station

with EZ Mount

Backer Plate

Installation Instructions

• Failure to follow these warnings and the installation instructions could result in serious injury

or death.

• Read all instructions before installing diaper changing station. Keep these instructions. DO NOT

discard.

WARNING

SI253D

Thank you for purchasing a quality Foundations

®

product. Our goal is 100% consumer satisfaction!

If, for any reason you are not satisfied or if you have questions regarding your product or installation,

please contact our customer service team at 1-877-716-2757. Please DO NOT contact your distributor

or reseller as we are better prepared to assist you.

Summary of Contents for 100-EHBP

Page 1: ...re installing diaper changing station Keep these instructions DO NOT discard WARNING SI253D Thank you for purchasing a quality Foundations product Our goal is 100 consumer satisfaction If for any reason you are not satisfied or if you have questions regarding your product or installation please contact our customer service team at 1 877 716 2757 Please DO NOT contact your distributor or reseller a...

Page 2: ...l Plate 1 3 Wood Screws PARTS LIST 3 4 Finishing Washers 3 Machine Screws 3 4 Flat Washers Toggle Anchors 1 1 4 Caps 15 3 8 390 mm 17 1 2 445 mm 34 1 4 870 mm For Wood Studs 3 4 Flat Washers For Use With Toggle Anchors Door wall plate to be mounted on outside of restroom door IMPORTANT NOTE The EZ Mount Backer Plate may or may not be included with the model you purchased The backer plate is intend...

Page 3: ...es and secure top left corner of changing station to wall stud using the appropriate screw and washer Continue to secure the three 3 remaining corners using the appropriate screws and washers as described in Note 1 or Note 2 7 Ensure all four 4 screws are tight and snap caps over screw heads Using Toggle Anchors 1 Insert metal end of toggle anchor into 1 2 hole 2 Slide zip strip down snugly agains...

Page 4: ...at exceed the total weight limit of 50 pounds 22 7 kg may cause the unit to be unstable or may cause a hazardous unstable condition to exist WARNING 8 1 4 210 mm 32 813 mm on center Top For A D A Compliance 46 117 cm A F F Fig e Fig f Locking Tab Top Of Buckle Using Backer Plate Mounting System If your changing station was supplied with a backer plate please follow these instructions If a backer p...

Reviews: