NVR100 User Manual
Address: 11th Floor, A-06 Area, No.370, Chengyi Street, Jimei, Xiamen, Fujian, China.
Website: www.fourfaith.com Tel: +86-592-5907276 Fax: +86-592-5912735
24
/ 6
5
⚫
File Packaging Duration:
In order to facilitate file retrieval and playback, the video file packaging time is too long
which is unfavorable to the time spent on file retrieval and playback. If the video file
packaging time is too short, the file is too trivial. So that it is not conducive to management.
File packaging time ranges from 5 to 30 minutes.
⚫
Alarm Record Time:
Users can setting the alarm recording time on this web page. The range is 1~30 minutes.
⚫
Pre-recording Duration:
For the alarm recording, it may be necessary to know what happened in the previous
period before the alarm was triggered. The pre-recording duration can be set according to
the requirements of the device. According to the length set by the channel, the video
within the set time before the alarm occurs can be stored in the recording. Pre-recording
ranges from 0 to 5 seconds.
⚫
Video Mode:
1. Different video channel configurations can be set as different recording parameters.
When the user selects the "channel" and setting the parameters, the parameters will be
automatically updated to the current channel.
2. When user choose the mode is "Configurable", the video channel allow to setting the
video trigger condition (Alarm level has highest priority, commonly has lowest priority)
3. When user choose the mode is "Close", the current channel will not record.
⚫
Copy to Channel:
Copy the configuration of the video channel to the selected channel.
⚫
Video Trigger Condition Setting:
User can check the conditions for video triggering. If it is general setting, detection and
alarm are checked
at the same time. So the priority of trigger video is “alarm” > “detect”.
