NVR100 User Manual
Address: 11th Floor, A-06 Area, No.370, Chengyi Street, Jimei, Xiamen, Fujian, China.
Website: www.fourfaith.com Tel: +86-592-5907276 Fax: +86-592-5912735
35
/ 6
5
Device ID:
Uniformly managed and distributed by the server platform.
Registered Password:
Uniformly managed and distributed by the server platform.
Local Port:
NVR technology SIP signaling port, default is 5060.
Registered Expires:
Validity of SIP registration initiated by NVR and re-registered upon
expiration.
Keep Alive Interval:
The keep alive packet sending interval that NVR keeps in contact
with the server.
⚫
Output Setting:
The output mode mainly configures OSD output parameters, which refers to adding
defined or user-defined fonts to the encoded video stream to identify or identify the status
information of the channel or device.
OSD Enabled:
The OSD information for the corresponding location can be turned on or
off.
OSD Type:
➢
Time:
When OSD type is selected as time, encode and display the system time at the
specified location on the screen in real time format as "yyyy-mm-dd hh:mm:ss".
➢
Device ID:
OSD type is selected as "Device ID" to encode and display the device ID
at the specified location on the screen.
➢
Device Position:
OSD type is selected as "Device Position ", encoding and
displaying the device position information configured in the general settings page at
the specified location on the screen.
➢
GPS Information:
OSD type is selected as "GPS Information" to encode and display
GPS positioning or GPS antenna switching information at the specified position on
the screen.
