NVR100 User Manual
Address: 11th Floor, A-06 Area, No.370, Chengyi Street, Jimei, Xiamen, Fujian, China.
Website: www.fourfaith.com Tel: +86-592-5907276 Fax: +86-592-5912735
45
/ 6
5
➢
Timer Mode
In the timer mode, the remote control can be switched on and off. It can be switched on
during the timing period and off during the timing period. The ACC switch is invalid. At
most four switch time periods can be set on a regular day.
(1) During the time period of regular shutdown, press "start up" for the remote control,
and then the device will start up normally. When the next time period of regular
shutdown occurs, the device will shut down.
(2) When the remote control is in a time period of regular shutdown, press "start up" and
the device will start up normally. If the remote control is "shut down" again, the device
will shut down. When the next time period of regular shutdown occurs, the device will
start up normally.
(3) When the device is running to the next time period, the device will start up.
(4) During the time period of regular startup, press "shutdown" for the remote control, and
then the device will be turned off. If the remote control is turned on again, it can be
turned on normally. When the time comes for regular shutdown, it can be turned off
normally.
