F3X36 Series Router
User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 58 of 85
Add
：
J1-J3, 3
rd
Floor, No.44, Guanri Road, Software Park, Xiamen .361008.China
http://www.four-faith.com
Tel
：
+86-592-6300320 Fax
：
+86-592-5912735
1. Select the policy number (1-10) in the drop-down menu.
2. For this policy is enabled, click the radio button next to "Enable"
3. Enter a name in the Policy Name field.
4. Click the Edit List of PCs button.
5. On the List of PCs screen, specify PCs by IP address or MAC address. Enter the
appropriate IP addresses into the IP fields. If you have a range of IP addresses to filter,
complete the appropriate IP Range fields. Enter the appropriate MAC addresses into
the MAC fields.
6. Click the Apply button to save your changes. Click the Cancel button to cancel your
unsaved changes. Click the Close button to return to the Filters screen.
7. If you want to block the listed PCs from Internet access during the designated days
and time, then keep the default setting, Deny. If you want the listed PCs to have
Internet filtered during the designated days and time, then click the radio button next
to Filter.
8. Set the days when access will be filtered. Select Everyday or the appropriate days of
the week.
9. Set the time when access will be filtered. Select 24 Hours, or check the box next to
From and use the drop-down boxes to designate a specific time period.
10. Click the Add to Policy button to save your changes and active it.
11. To create or edit additional policies, repeat steps 1-9.
12. To delete an Internet Access Policy, select the policy number, and click the Delete
button.
Note:
1
）
The default factory value of policy rules is "filtered". If the user chooses the default
policy rules for "refuse", and editing strategies to save or directly to save the
settings. If the strategy edited is the first, it will be automatically saved into the
second, if not the first, keep the original number.
2
）
Turn off the power of the Router or reboot the Router can cause a temporary
failure
。
After the failure of the Router, if can not automatically synchronized NTP
time server, you need to recalibrate to ensure the correct implementation of the
relevant period control function.
3.3.6.2 URL Filter
If you want to prevent certain client access to specific network domain name, such as
www.sina.com. We can achieved it through the function of URL filter.
URL filtering function
