F7B3X Series Router User Manual
Xiamen
Xiamen
Xiamen
Xiamen Four-Faith
Four-Faith
Four-Faith
Four-Faith Communication
Communication
Communication
Communication Technology
Technology
Technology
Technology Co.,Ltd.
Co.,Ltd.
Co.,Ltd.
Co.,Ltd.
Page 46 of 81
Add
:
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
:
//www.fourfaith.com
Tel
:
+86 592-6300326
6300325
6300324
Fax
:
+86 592-5912735
Name:
Name:
Name:
Name:
to indicate this connection name, must be unique
Enabled:
Enabled:
Enabled:
Enabled:
If enable, the connection will send tunnel connection request when it is reboot or
re-connection, otherwise it is no need if disable
Local
Local
Local
Local WAN
WAN
WAN
WAN Interface:
Interface:
Interface:
Interface:
local addresss of the tunnel
Remote
Remote
Remote
Remote Host
Host
Host
Host Address:
Address:
Address:
Address:
IP/domain name of end opposite; this option can not fill in if using tunnel
mode server
Local
Local
Local
Local Subnet:
Subnet:
Subnet:
Subnet:
IPSec local protects subnet and subnet mask, i.e. 192.168.1.0/24; this option can
not fill in if using transfer mode
Remote
Remote
Remote
Remote Subnet:
Subnet:
Subnet:
Subnet:
IPSec opposite end protects subnet and subnet mask, i.e.192.168.7.0/24; this
option can not fill in if using transfer mode
Local
Local
Local
Local ID:
ID:
ID:
ID:
tunnel local end identification, IP and domain name are available
Remote
Remote
Remote
Remote ID:
ID:
ID:
ID:
tunnel opposite end identification, IP and domain name are available
Detection:
Detection:
Detection:
Detection:
this part contains configure information of connection detection
Enable
Enable
Enable
Enable DPD
DPD
DPD
DPD Detection:
Detection:
Detection:
Detection:
enable or disable this function, tick means enable
Time
Time
Time
Time Interval:
Interval:
Interval:
Interval:
set time interval of connect detection (DPD)
Timeout:
Timeout:
Timeout:
Timeout:
set the timeout of connect detection
Action:
Action:
Action:
Action:
set the action of connect detection
Advanced
Advanced
Advanced
Advanced Settings:
Settings:
Settings:
Settings:
this part contains relevant setting of IKE, ESP, negotiation mode, etc.