Bond Manufacturing Co., Inc. | Page 2
WARNING
Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so
SAFETY INFORMATION
•
•
•
•
The installation of this product must conform with local codes or, in the absence of local codes,
with either the National Fuel Gas Code, ANSIZ223.1/NFPA 54, or CAN/CGA-B149.1, National Gas and
•
•
burner obstructions before use.
•
•
•
Combustible materials should never be within 48 inches of the top, back or sides of your propane
•
•
anywhere near the appliance.
•
Users should be alerted to the hazards of high surface temperatures and keep a safe distance to
avoid burning or clothing ignition.
•
Do not transport it while in operation.
•
•
•
unit.
•
Keep ventilation openings in cylinder enclosure (FIREBOWL BODY) free and clear of debris.
•
•
•
•
The conversion or attempted use of natural gas in a propane unit is dangerous.
•
•
Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.
•
•
Inspect the burner before each use of the appliance. If there is evidence of damage, the burner must
be replaced prior to the appliance being put into operation. Use Manufacturer approved or supplied
replacement burner only.
•
used.
•
•
A dented or rusty propane cylinder may be hazardous and should be checked by your gas supplier
prior to use.
•
