FOUR WINDS INTERNATIONAL
Read and follow these instructions carefully. Inspect product before each use. DO NOT USE
product if deformed, damaged, or not securely installed. Avoid contact with objects or
chemicals that may damage or weaken product. Product is not designed for use as a
personal restraint or for towing. User is responsible for determining product's suitability for
a particular purpose. Core Marketers Group, Inc. and Four Winds International are not
responsible for damage or injury caused by improper use of products.
The correct method for securement of an ATV or motorcycle is to use two ratchet straps in front
and two on the rear. Additionally the front wheel must be chocked. The trax are not intended nor
designed to control the gravitational forces applied during stopping, turning or accelerated loads.
Load Testing:
Direct pull of Load Lock in the Core-Trax™ tie-down system: (breaking strength)
1,500 pounds per Load Lock.
NOTE:
When possible attach the load lock(s) nearest the mounting hardware. This will allow for
the safest use.
Working Load:
Maximum cargo weight a tie-down can safely be used for.
Breaking Strength:
Maximum tested cargo weight a tie-down can handle before partial or
complete failure. The industry standard calculation for Working Load is 1/3 of the Breaking
Strength. I.E. Core-Trax™ with a combine Trax/Load Locks tested breaking strength of 1,500 lbs.
has a Working Load of 500 lbs. per Load Lock.
Wheeled loads; use a combination of wheel chocks and set brakes in conjunction with the use of
all tie-down product.
Selecting Proper Tie-Downs
• Use two (2) minimum 500 lb. Working Load* tie-downs per motorcycle up to 500 lbs.
• Use four (4) tie-downs for ATV’s and motorcycles weighing 500 to 1,000 lbs.
Add two more for every 500 lbs. thereafter (Core-Trax uniquely supports this method by making
available multiple locking positions).
For other applications, a good rule is that each tie-down should have a Working Load equal or
greater than the weight of the cargo. Wheeled loads; use a combination of wheel chocks and set
parking brakes in conjunction with the use of all tie-down products.
NOTE: *
These are only suggestions; please contact your local department of transportation for
their recommendations.
To obtain warranty service for the Core-Trax product, please call (951) 699-1618. Proof of
purchase is required. Shipping expenses are the buyer's responsibility.
Exterior Controls & Operations
5-8
Core-Trax™ Tie-Down System
Summary of Contents for Chateau
