Timer
plus
5
4 Quick start
Make sure that the Timer is connected to the power (use the AC adaptor,
connect it to the power input on the left side of the Timer), and follow the next
five easy steps:
While in recording mode, the sensor icon on the display will blink or become
animated. Press the Start / Stop button to stop recording. The animation stops
and the display show the last recording.
Note: When you plug in a sensor, the timer automatically recognizes it. But if
you plug more than one sensor you will have to press the sensor’s button.
1. Turn the
Timer on
2. Plug in the
sensor
4. Select
Precision
5. Start
recording
1
st
Photo gate
2
nd
Photo gate
Smart
Pulley
Distance
3. Select
measurement
