12
EXTENSION CORDS
When using the power tool at some distance from the socket, be sure to use an extension cord powerful enough to
carry the current that the tool needs. An undersized extension cord will cause a voltage drop in the line leading to
overheating and power loss. Use the table to determine the minimum size of son required in an extension cord.
Only extension cords in accordance with the EC standards may be used.
Cord length
: up to 15m
Wire size
: 3 x 2.5m
2
Before using any extension cord, make sure it has no parts are bare and that the insulation is not cut or worn.
Repair or replace immediately a damaged or frayed cord.
ATTENTION :
Extension cords must be removed from the work area or located so that they will not get caught in parts,
tools or other objects while using the tool.
ATTENTION :
KEEP ELECTRICAL TOOLS AND EQUIPMENT AWAY FROM CHILDREN.
RECOMMENDATIONS OF USE
The belt sander and disc was designed and built for all the work of sanding wood and similar materials to wood.
Sanding of other materials may present a risk of fire, accidents or damage.
The sanding strip can measure 914mm long by 100mm wide, while the disc should have a diameter of 152mm.
The belt is tensioned by a tensioning system, while the disc is to be glued to its support. The table can be tilted from
0 to 45 degrees and you can use it to work with the disk or tape, but in this case the belt should be positioned
vertically.
