4
6.
Do not force
the machine. It will work better when used with the pressure it was designed for.
7.
Use
the correct tools. Do not force a small tool to do the work of a bigger tool. For example, do not use a circular
saw to cut branches or logs.
8.
Wear
appropriate clothing. Avoid loose clothing, and remove jewellery which could become caught in moving parts.
Non-slip shoes are particularly recommended when working outside. Keep long hair tied up.
9.
Always
wear safety glasses. Also wear a mask if operating the machine creates dust.
10.
Do not
mistreat the power cord. Never use the power cord to pull out the plug. Keep the power cord away from
heat, oil and sharp edges.
11.
Do not
bend over the machine. Keep your balance at all times.
12.
Keep
tools in good condition. Clean tools to obtain the best results with them.
Follow instructions
to grease and
change accessories. Regularly check the power cord and replace it if damaged. Keep handles dry, clean and free
from oil and grease.
13.
Disconnect
the tool when not in use, before the maintenance and while changing accessories such as blades,
drills, etc.
14.
Remove
all maintenance tools. Get used to checking that all maintenance tools are removed before using the
machine.
15.
Avoid
accidentally starting the machine. Make sure that the switch is in the "OFF" position before connecting the
power.
16.
If the machine is used outside, use only extension leads designed for outdoor use.
17.
Be observant.
Use common sense when operating machinery. Do not use the tool when tired.
18.
Inspect
parts before use. Before continuing to use the tool, inspect any protective parts) which could be damaged
to make sure that they work well. Verify that the moving parts are properly aligned, and are not jammed or broken.
Check the assembly and any other conditions which may affect the correct functioning of the machine. Any
damaged part or guard must be repaired or replaced by an approved after-sales service centre. Do not use the
tool if the switch does not work correctly.
19.
Warning
: the use of any non-recommended accessory can present a health risk.
20.
Have the machine repaired
by a qualified person. This machine is built according to relevant safety requirements.
Repairs must only be made by a qualified person using original spare parts, otherwise it may be very dangerous
for the user.
21.
Keep these instructions.
