43
3
bIoS Security features
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input
user password optionally.
If you have installed the Supervisor Password, the following items will appear:
► User Access Level
This item is used to set user access level.
The available settings are:
[No Access]: Prevent user access to the setup utility.
[View Only]: Allow access to the setup utility but the fields can not be changed.
[Limited]: Allow only limited fields to be changed, such as date and time.
[Full Access]: Allow any field to be changed except the supervisor password.
► Change User Password
This item is used to install or change user password.
► Clear User Password
This item will be displayed only when a User Password was set before. It is used to clear the
user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
Enter New Password :
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
BIOS Security Features
Security Settings
Help Item
Supervisor Password : Installed
Install or change the
User Password
: Installed
password.
Change Supervisor Password
[Press Enter]
User Access Level
[Full Access]
Change User Password
[Press Enter]
Clear User Password
[Press Enter]
Password Check
[Setup]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
