background image

31

3

Security

                      

            

► Administrator Password 

This item is used to install or change administrator password.
After you input administrator password, it then will ask you to
confirm the password.

► User Password

This item is used to install or change user password.

 

   

Create New Password

Create New Password

 
 

Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.

Aptio Setup Utility  -  Copyright (C) 2011 American Megatrends, Inc.

  Main  F-Center  Advanced  Boot  Power  Health  Security  Save & Exit

 

 Administrator Password               Not Installed

User Password                        Not Installed

 Administrator Password               
 User Password        

 Security option                      [Setup]

 HDD BootSector Write                 [Normal]

→  ←: Select Screen 
↑  ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values

 

F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Set Administrator Password.
If only the Administrator’s 
password is set,Then this only 
limits access to Setup and is 
only asked for when entering 
Setup. The password must be 3 
to 20 characters long.

Summary of Contents for D250S


































































Reviews: