3
40
Power Management Setup
ACPI (Advanced Coniguration and Power Interface) is an open industry standard interfaces
enabling OS-directed coniguration, power management, and thermal management of mobile,
desktop, and server platforms. It deines ive sleeping states, they are :
S1 - The S1 sleeping state is a low wake latency sleeping state. In this state, no system
context is lost (CPU or chip set) and hardware maintains all system context. (also called
Power On Suspend
)
S2 - The S2 sleeping state is a low wake latency sleeping state. This state is similar to the S1
sleeping state except that the CPU and system cache context is lost (the OS is respon-
sible for maintaining the caches and CPU context). Control starts from the processor’s
reset vector after the wake event.
S3 - The S3 sleeping state is a low wake latency sleeping state where all system context is lost
except system memory. CPU, cache, and chip set context are lost in this state. Hardware
maintains memory context and restores some CPU and L2 coniguration context. Control
starts from the processor’s reset vector after the wake event. (also called
Suspend to
RAM
)
S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported
by ACPI. In order to reduce power to a minimum, it is assumed that the hardware platform
has powered off all devices. Platform context is maintained. (also called
Suspend to
Disk
)
S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The
system is in the “soft” off state and requires a complete boot when it wakes. Software
uses a different state value to distinguish between the S5 state and the S4 state to allow
for initial boot operations within the BIOS to distinguish whether or not the boot is going to
wake from a saved memory image.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Power Management Setup
ACPI Suspend Type
[S3 (STR)]
Help Item
Power On after Power Fail
[Power Off]
HPET
[Enabled]
Select the ACPI
Resume by Ring
[Enabled]
state used for
Resume by LAN
[Enabled]
System Suspend .
Resume by PCI Card
[Enabled]
Resume by USB Devices
[Enabled]
Resume by PS2 �eyboard
[Enabled]
Resume by PS2 Mouse
[Enabled]
Resume by RTC
[Disabled]
:Move Enter:/-/:Value F10:Save
ESC:Exit F1:General Help
:Move Enter:/-/:Value F10:Save
ESC:Exit F1:General Help
:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[S3 (STR)]
