Installation Precautions
Please carefully read the following procedures to install your computer :
■
It is suggested to select high-quality, certified fans in order to avoid damage
to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU fan is not properly installed.
■
We cannot guarantee that your system can operate normally when your
CPU/memory is overclocked. Normal operation depends on the overclocking
capacity of your device.
■
If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF
cables to the internal connectors on the motherboard, make sure their
pinouts are matching with the connectors on the motherboard. Incorrect
connections might damage the motherboard.
■
When handling the motherboard, avoid touching any metal leads or
connectors.
■
If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
■
Before turning on the power, please make sure the power supply AC input
voltage setting has been configured to the local standard.
■
To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
■
If you are uncertain about any installation steps or have a problem related to
the use of the product, please consult a certified computer technician.
CA
UT
IO
N
!
■
Electrostatic discharge (ESD) is the sudden and momentary electric current
that flows between two objects at different electrical potentials. Normally it
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
■
Ensure that the DC power supply is turned off before installing or removing
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
WA
R
N
IN
G
!
